Industrial Transformer

These are designed for applications with solenoids and relays are in use. Most electromagnetic devices are initially energized before operation. The transformers maximize the inrush capacity and output voltage regulation at this very first phase. They also have high quality insulation. They electrically insulate the different types of windings. This type of transformers eliminate moisture by means of the polyester resins and the vacuum impregnation.
Power transformers operate different filtering devices such as capacitors to minimize the input fluctuations. These are needed usually in places where constant voltage or constant current very low power ratings are involved. Sometimes called as the machine tools transformer, is also an isolation transformer to provide great voltage regulation. The phenomenon called as the inrush current is achieved by producing a higher level of secondary voltage stability during short time intervals of the overload functions.
In addition to the minimum current required for the operation of the circuit there are other factors which determine the better control operation and the transformer properties. The transformer needs to provide sealed Volt-ampere to the load circuit for the required time period. The total inrush VA is what the transformer must produce to initialize the energization of any control systems. And finally a safely assumed 40% of power factor is needed. The power factor needs much precise vector data to be accurately measured; therefore a 40% safe marker is derived.

Industrial current transformers

Distribution transformers are used at lower voltages compared to power transformers. A current transformer is something that steps up or steps down an AC electricity. Either amplification or reduction operation is carried out. These are also called the instrument transformers because of the fact that they are needed to operate specific instruments. When instruments need lower voltages than the supplied electricity, they use a transformer to get to the desired input electricity. The same applies when an instrument needs much higher voltages than the supplied electricity. They also function as sensors of power scales. In places like power stations, they sense the available volts and then transform them into the necessary supply volts. There are also specialized current transformers for specific needs such as the wideband current transformer. These operate with oscilloscope in measuring high frequency currents of their waveforms to produce accurate output volts per ampere.


# 116/7 & 117/6, Mookambika Temple Road, Machohalli Forest Gate, Magadi Main Road, Bengaluru – 560 091


+91 96111 46656
+91 98862 60538